321
When the [REV] button is lit: The effect is executed in
the direction from the last keyframe to the first
keyframe.
When the [NORM/REV] button is lit: Each time the
effect is executed, the direction reverses.
Executing an effect up to the next
keyframe
1
Press the [STOP NEXT KF] button, turning it on.
2
Press the [RUN] button.
This executes the effect as far as the next keyframe.
When the [REV] button is lit, it is executed as far as
the previous keyframe.
Repeating an effect
1
Press the [EFF LOOP] button, turning it on.
2
Press the [RUN] button.
This executes the effect repeatedly, from the first
keyframe to the last keyframe.
When the [REV] button is lit, the effect is executed in
the reverse direction.
3
To stop the repeating effect, press the [EFF LOOP]
button, turning it off, or press the [REWIND] button.
Saving Effects
When you recall an effect, the currently recalled effect is
automatically saved in a register. This is referred to as the
auto save function.
You can disable the auto save function in the Setup menu.
You can also specify a register and save an effect in it.
Saving an effect in a specified register
Specify the register using the numeric keypad control
block.
1
In the numeric keypad control block, press the [EFF]
button.
The control block switches to effect operation mode,
and the [EFF] button and [RCALL] button light
amber.
2
Select the region using the region selection buttons.
You can select more than one button.
The following region selection buttons can be operated
for effects.
M/E1 to M/E5, P/P, USER1 to USER8,
DME1 to DME4, PBUS, GPI, MCRO, ALL
For details about region selection, see “Region
selection in the numeric keypad control block”
(page 306).
For details about saving a master timeline, see
“Creating and saving a master timeline” (page 322).
3
Press the [STORE] button, turning it on.
4
Enter the number of the register in which you want to
save using the numeric keypad buttons.
For details about selecting a register, see “Register
selection in the numeric keypad control block”
(page 306).
5
Press the [ENTER] button.
This saves the effect in the specified register.
The [RCALL] button and the [STORE STATS] button
light amber.
To undo the saving of an effect
While the [STORE STATS] button is lit amber, press and
hold the [STORE STATS] button and press the [UNDO]
button.
To Next Page
Loading...
