6-15
Key code display (at input of H key, Key code: 0Ah)
At input of faulty voltage
When two keys are pressed
2-3-3. Remote Commander Key Name Display and Key
Code Display
2-3-3-1. Transition Keys in Self Check Mode
• Remote commander keys except keys transited in self check
2-3-3-2. Operation and Display
When a key on the remote commander is pressed in the Self Check
mode, the name of that key is displayed on the FLD. Also, the key
name display and the key code display can be switched with the
[DISPLAY] key on the remote commander. “NOTHING” is dis-
played when nothing is entered. Also, VIDEO CD, DVD, and CD
segments turn on when a communication error occurred.
Remote commander key name display (at input of X key)
Remote commander key code display (at input of X key, Key code: 39h)
To Next Page
Loading...
