Sony STR-DA5200ES - Page 95

95
GB
Other Operations
C ;DIGITAL
(EX)
Lights up when the receiver
is decoding Dolby Digital
Surround signals. When the
receiver is decoding Dolby
Digital Surround EX
signals, “;DIGITAL EX”
also lights up. When
playing a Dolby Digital
format disc, be sure that you
have made digital
connections and that
INPUT MODE is not set to
“ANALOG ” (page 89).
D INPUT Lights up constantly. One of
the input indicators also
lights up according to the
current input.
E AUTO Lights up when INPUT
MODE is set to “AUTO”
(page 90).
F HDMI 1 2 3 Lights up when the receiver
recognizes a component
connected via an HDMI IN
jack (page 28).
G DTS (-ES) Lights up when DTS
signals are input. “DTS-
ES” also lights up when
DTS-ES signals are
decoded. When playing a
DTS format disc, be sure
that you have made digital
connections and that
INPUT MODE is not set to
“ANALOG ” (page 90).
H 96/24 Lights up when the receiver
is decoding DTS96/24 (96
kHz/24 bit).
I COAX Lights up when INPUT
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the COAXIAL
jack.
Name Function
J OPT Lights up when INPUT
MODE is set to “AUTO”
and the source signal is a
digital signal being input
through the OPTICAL jack.
K ANALOG Lights up when INPUT
MODE is set to “AUTO”
and no digital signal is
being input through the
COAXIAL or OPTICAL
jacks, or when INPUT
MODE is set to
“ANALOG,” or when the
“2ch Analog Direct” is
being used (page 90, 107).
L MULTI IN Lights up when MULTI IN
is selected (page 48).
M BI-AMP Lights up when surround
back speakers selection is
set to “BI-AMP.”
N D.RANGE Lights up when dynamic
range compression is
activated (page 74).
O EQ Lights up when the
equalizer is activated
(page 75).
P RDS Lights up while receiving
RDS information (page 82).
Q ZONE 2/
ZONE 3
Lights up while operation in
zone 2/zone 3 is being
enabled.
R SLEEP Lights up when the sleep
timer is activated (page 97).
Name Function
continued