40
GB
8: Setting the speakers
Set the appropriate speaker impedance for the
speakers you are using.
1 Choose Settings menu
(page 38).
The Settings menu list appears on the TV
screen.
2 Press V/v repeatedly to select
“System,” then press or b.
3 Press V/v repeatedly to select
“Speaker Impedance,” then
press .
4 Press V/v repeatedly to select
“4 Ω” or “8 Ω” depending on the
speakers you are using, then
press .
Notes
• If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
• When you connect all speakers with a normal
impedance of 8 ohms or higher, set “Speaker
Impedance” to “8 Ω.” When connecting other types
of speakers, set it to “4 Ω.”
• When you connect front speakers to both the
SPEAKER A and B terminals, connect the
speakers with a normal impedance of 8 ohms or
higher.
Setting the speaker impedance
2-4
5
To Next Page
Loading...
