STR-DA6400ES
10
Front panel
Status of the POWER button
Off
The receiver is turned off (initial setting).
Press POWER to turn the receiver on. You cannot turn the receiver on using the
remote.
On/Standby
Press
/ on the remote to turn the receiver on or set it to the standby mode.
When you press POWER on the receiver, the receiver will be turned off.
Name Function
POWER Press to turn the
receiver on or off.
! SPEAKERS
(OFF/A/B/A+B)
Switch to OFF, A, B,
A+B of the front
speakers.
" DIMMER Press repeatedly to
adjust brightness of the
display.
# INPUT MODE Press to select the input
mode when the same
components are
connectedtoboth
digital and analog jacks.
$ Display
window
The current status of
the selected component
or a list of selectable
items appears here.
% HDMI IN Press to select the input
signal from the
component connected
to the HDMI IN jacks.
& HDMI OUT Press to select output
signal tothe component
connected to the HDMI
OUT jacks.
' MASTER
VOLUME
Turn to adjust the
volumelevelofall
speakers at the same
time.
SELECT (QH)toselect
zone 2 or zone 3 first
(“ZONE 2 INPUT” or
“ZONE 3 INPUT”
appears on the display),
then turn INPUT
SELECTOR to select
the input source.
) 2CH/A.DIRECT Presstoselectsound
field.
A.F.D.
MOVIE
MUSIC
* MULTI
CHANNEL
DECODING
lamp
Lights up when multi-
channel audio signals
are decoded.
+ Remote sensor Receives signals from
remote commander.
, PHONES jack Connects to
headphones.
Name Function
( INPUT
SELECTOR
Turn to select the input
source to play back.
To select the input
source for zone 2 or
zone 3, press ZONE/
2 HDMI IN 6 Connect to a
camcorder. The video
and sound from your
camcorder is input.
3 AUTO CAL MIC
jack
Connects to the
supplied optimizer
microphone for the
Digital Cinema Auto
Calibration function.
4 VIDEO 2 IN/
PORTABLE AV
IN jacks
Connect to a portable
audio/video component
such as a camcorder or
video game.
5 MENU Press to display the
menu of the receiver.
6 RETURN Press to return to the
previous menu or exit
the current menu of the
receiver.
7 ZONE POWER Each time you press
ZONE POWER, the
output signals for the
selected zone will be
turned on or off.
Name Function
8 TONE MODE
TONE +/–
Adjusts FRONT/
CENTER/
SURROUND/
SURROUND BACK
BASS and TREBLE.
Press TONE MODE
repeatedly to select
BASS or TREBLE,
then press TONE +/– to
adjust the level.
- TUNING MODE
TUNING +/–
Press TUNING MODE
repeatedly to select
FM, AM, XM or
SIRIUS, and then press
TUNING +/– to scan
for a station.
. ZONE SELECT Press SELECT
repeatedly to select
zone 2, zone 3, or the
main zo
ne.
/ DISPLAY Press repeatedly to
select information
displayed on the
display.
0
6/V/"/B
Press 6/V/"/B to select
the menu items. Then
press to enter the
selection.
1 GUI MODE Press to switch the
display mode of the
menu between GUI
MODE (to display the
menu on the TV
screen) and DISPLAY
MODE (to display the
menu in the display
window).
SECTION 2
GENERAL
This section is extracted
from instruction manual.
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com
To Next Page
Loading...
