Maintenance and care
59
The KENDRO service offering
Kendro Laboratory Products recommends annual
servicing of the centrifuge and the accessories by an
authorized service personnel. The preventive service
provided by KENDRO includes checking:
• the electrical installation If a centrifuge tube
con-
taining infectious material leaks during a run, you
have to disinfect the centrifuge immediately.
• the suitability of the location
• the lid lock mechanism and the safety circuit
• the rotor
• the rotor fastening and the drive shaft
Defective parts are exchanged.
KENDRO offers inspection and service contracts
covering these benefits. Inspection costs are
charged as flat-rate contracts.
Necessary repairs are carried out free of cost during
the warranty conditions, and against payment after
expiration of the warranty.
Warranty conditions
The warranty period starts with the day of delivery.
Within the warranty period the centrifuge is repaired
or replaced free of cost if there are demonstrable
faults in materials or workmanship.
Conditions for a warranty are that:
• the centrifuge is used according to the instructions
of use
• installation, additions, adjustments, changes or
repairs are carried out exclusively by personnel
authorized by KENDRO
• the required maintenance and care procedures
are carried out regularly.
To Next Page
Loading...
