Specim IQ - Page 50

| Specim IQ User Manual | 50
1.
Press the SET button, and select Device > Power saving.
The screen below is opened:
Figure 77: Power Saving
The current battery info is shown in the Battery info fields, as follows:.
• Remaining charge — This field indicates the remaining charge of the battery, in percentage from 0% to
100%.
• Approximate number of scans — This field indicates the estimated number of scans you can make without
recharging the battery.
Enabling Power Saving
2.
To enable power saving:
a) Slide the Power saving slider to the ON position.
b) Select a suitable sleep timeout from the Sleep timeout menu.
Figure 78: Selecting the Sleep Timeout
Disabling Power Saving
3.
To disable power saving:
a) Slide the Power saving slider to the OFF position.
4.
When done, press the BACK button
to return to the Settings screen.