Speco D8HS - SCAN Menu; Setup - SYSTEM

29
4-1-3. SCAN Menu
Figure 4.1.2 IP CAMERA Setup Screen Figure 4.1.3 Search IP Camera Screen
① Select the IP Camera protocoland then on click the scan button
② Select the ip camera on the list and then click the register button.
③ After the registration is completed, the basic information is to be displayed.
4-2. Setup – SYSTEM
In the SETUP menu, select the SYSTEM tab. Then, the SYSTEM menu is displayed as pictured below.
Navigate through the menu items using the mouse or the remote control and change the value of the menu.
Figure 4.2.1. SYSTEM Setup Screen