98
9. Network Access Using the Smart Phone Viewer
9-1. App Viewer for iPhone
1. Enter the Apple App Store.
2. Search “Speco Player” in the App Store.
9-1-1. Live
1. Open the installed “Speco Player” App and click button to add a remote device.
2. Enter the site name, IP or DDNS address, Network Port number (default 5445), ID(default admin) and
Password (default 1111). Then, click “Save” button.
* Note: Network Port and Web Port must be forwarded before adding a new site.
3. Select a registered device and select LIVE. Then click “CONNECT” button.
Notice
Data Usage applied without Wi-Fi connection. Please check with your Phone Carrier.
Notice
SPECO Player is for the HS, ZS, NS, DS, RS, WRS and HD series DVRs. SPECO
VIEWER is not compatible with the T Series DVR’s (TH, TN or TL) or the PC Series
To Next Page
Loading...
