SS2000 Operator’s Manual 1–1
1 - INTRODUCTION
The SpectraSensors SS2000 is a high-speed, diode-laser based extractive
analyzer designed for extremely reliable monitoring of very low (trace) to
standard concentrations of specific components in various background gases.
In order to ensure that the analyzer performs as specified, it is important to
pay close attention to the details of the installation and operation. This manual
contains a comprehensive overview of the SS2000 analyzer, and step-by-step
instructions on:
• Inspecting the Analyzer and Sample Conditioning System
• Installing the Analyzer and Sample Conditioning System
• Powering Up the Analyzer
• Operating the SS2000 System
• Receiving Serial Data (RS-232 Output)
• Powering Down the Analyzer
• Troubleshooting
Who Should Read This Manual
This manual should be read and referenced by anyone installing, operating, or
having contact with the analyzer.
How to Use This Manual
Take a moment to familiarize yourself with this Operator’s Manual by reading
the Table of Contents.
Because there are many options and accessories available for the SS2000, this
manual has been assembled in a modular fashion with sections addressing the
specific options and accessories ordered with this particular unit. Read each
section in the manual carefully so you can quickly and easily install and operate
the analyzer.
The manual includes images, tables, and charts that provide a visual
understanding of the analyzer and its functions. Special symbols are also used
to make you aware of potential hazards, important information, and valuable
tips. Pay close attention to this information.
To Next Page
Loading...
