Spectrasensors SS2000 - Figure 3-5: Connection Description Window

Operating the SS2000 System
3–14 H
2
S in Natural Gas
7. The Connect To window appears prompting for a connection, as
shown in Figure 3–6. Click the Menu Arrow under Connect Using
to view the choices.
8. Click on the appropriate port to which your analyzer is connected
(COM1, COM2, COM3, etc.) as established under “Connecting the
Input and Output Signals” on page 2-10. Click OK.
Figure 3–5 Connection Description window.
Figure 3–6 Connect To window.