Spectrasensors SS2000 - Figure 3-7: COM Properties Window

SS2000 Operator’s Manual
H
2
S in Natural Gas 3–15
9. Once the port is chosen, the COM Properties window appears.
Make sure the COM properties for the port selected reflect those
shown in Figure 3–7 (19200 baud, 8 data bits, 1 stop bit, no parity,
and no flow control).
10. Click OK to establish the connection.
Once connected, the data will start streaming through the Hyperterminal
Window as shown in Figure 3–8.
For single channel systems, the data includes:
• H
2
S Concentration (ppmv)
• Wet Temperature (C) - the measured operating temperature in the
spectrometer cell
• Wet Pressure (mbar) - the measured operating pressure in the
spectrometer cell
For dual channel systems, the data includes:
• H
2
S Concentration (ppmv)
• H
2
O Concentration (lb/MMSCF) - for example (depending on
application)
Figure 3–7 COM Properties window.