SS2000 Operator’s Manual
H
2
S in Natural Gas 1–3
SpectraSensors Overview
SpectraSensors, Inc. (SSI) is a leading manufacturer of state-of-the-art
electro-optic gas analyzers for the industrial process, gas distribution and
environmental monitoring markets. Headquartered in Rancho Cucamonga,
California, SSI was incorporated in 1999 as a spin-off of the NASA/Caltech Jet
Always disconnect the main power to the instrument before
attempting any repair.
Read and understand all instructions before attempting to operate
the instrument. Observe all caution notes and warning labels.
Class IIIb invisible laser radiation. When open, avoid exposure to
beam. Conforms to provisions of US 21 CFR1040 10. Class I laser
product. Refer servicing to the manufacturer’s qualified
personnel.
Use a damp cloth to clean display and keypad to avoid static
electricity discharge.
Do not exceed 10 psig (0.7 barg) in sample cell. Damage to cell
window may result.
Do not hold or carry the analyzer by the measurement heads or
sample cells. Doing so may cause optical alignment problems
affecting the performance of the sensor.
When selecting an analyzer, the total system design must be
considered to ensure safe, trouble-free performance. Function,
sizing, proper installation, operation, and maintenance are
beyond the control of SpectraSensors and are the responsibilities
of the system designer and user.
If equipment is used in a manner not specified by the
manufacturer, the protection provided by the manufacturer may
be impaired.
To Next Page
Loading...
