UM2469 Rev 1 7/59
UM2469 Features
58
1 Features
• STM32F730I8K6 Arm
®
(a)
Cortex
®
-M7 core-based microcontroller featuring 64 Kbytes
of Flash memory and 176+16 Kbytes of RAM, in a BGA176 package
• TFT LCD 240x240 pixels with touch panel
• USB OTG HS FS
• SAI audio codec
• 4 ST-MEMS microphones
• 512-Mbit Quad-SPI Flash memory
• 8-Mbit external PSRAM
• 1 user and reset push-button
• Board connectors:
– USB with Micro-AB
– Audio jack for external speakers and microphone
• Board expansion connectors:
– Arduino™ Uno V3
– ESP-01 Wi-Fi
®
module connector
– Pmod™
–STMod+
• On-board ST-LINK/V2-1 supporting USB re-enumeration capability: mass storage,
Virtual COM port, debug port
• Flexible power-supply options: ST-LINK USB V
BUS
or external sources
• Power supply output for external applications: 3.3 V or 5 V
• Fanout board (included inside the board package) compatible with MikroElektronika
Click boards, ESP-01 and Seeed Studio™ Grove modules. Provision for headers for
direct breadboard plug-in.
• Comprehensive free software including a variety of examples available with the
STM32Cube™ MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including
IAR™, Keil
®
, GCC-based IDEs.
a. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and or elsewhere.
To Next Page
Loading...
