initialized. However bootloader initialization isn't very complicated:
1. Download PhoenixSuit ( official site) and unpack it;
2. Download Lubuntu server image with bootloader supporting SoC A20 rev.B for PhoenixSuit ( official site, "Firmwares" ->
"Cubieboard2" -> "Lubuntu Server") and unpack it.
3. Start PhoenixSuit. In case of update request, confirm it and wait till it's done.
4. Switch to "Firmware" tab and specify unpacked Lubuntu server image path.
5. Power off the device. Press and hold FEL button (it's near LAN and USB-OTG connectors). While still holding the button, connect
USB-OTG to your PC and then release the button.
6. You might need to explicitly install driver for the device on Windows family OS.
1. Navigate to the Device Manager.
2. Locate "Unknown Device" and right click on it.
3. In the context menu press "Update driver software...".
7. Specify "PhoenixSuit1.0.7\PhoenixSuit\Drivers\AW_Driver" as driver search directory.
8. After that a popup in PhoenixSuite will appear. Press "YES (Full install)" and wait for the completion.
9. Continue to autoinstall instruction.
To Previous Page
Loading...