5.3.10. UART Settings
In the Application Settings Device configuration -> UART
UART settings tab
Speed - Select the UART speed from the preset values in the range from 9600 bit/s to 921600 bit/s.
Use parity bit - use of parity bit.
Parity type - Types of parity:
Even - this bit type is set when total number of bits is odd
Odd - this bit type is set when total number of bits is even
Space - parity bit is always 0
Mark - parity bit is always 1
Stop bits - number of stop bits (1 or 2).
To Next Page
Loading...