Star Micronics TUP500 series - 14.4. MSW3

TUP500 Series Product Specifications
14-7
14.4. MSW3
Bit Function OFF/ “0” ON/“1” Emulation Note
SL SP EP
F Code Pages (See table below) ○ ○ × *3
E Code Pages (See table below) ○ ○ × *3
D Code Pages (See table below) ○ ○ × *3
C Code Pages (See table below) ○ ○ × *3
B Code Pages (See table below) ○ ○ × *3
A Code Pages (See table below) ○ ○ × *3
9 Code Pages (See table below) ○ ○ × *3
8 Code Pages (See table below) ○ ○ × *3
7
6
5 Chinese Character Printing
Position Count
(See table below) ○ × × *2
4 Printing Positions (See table below) ○ × × *2
3
2
1 <CR> Code Ignored <LF> handled as code ○ × ○
0
Amount of Line Feed 4mm 3mm ○ × ×
*2) Chinese Character Printing Position Count/ANK Printing Position Count
<For SBCS>
MSW3-4 Character
Types
Character Sizes
(Font + Right Spaces)
Font-A Printing Positions
(When Print Region is set to 72 mm)
0
ANK 12 (12+0) dot 48 Positions
1 ANK 15 (12+3) dot 38 Positions
When set to Japanese language characters (Japanese language characters and DBCS setting):
MSW3-5 Character Types Character Sizes
(Left Space + Font + Right Space)
Chinese Character Printing Positions
(When Print Region is set to 72 mm)
0
Two Byte Chinese Characters 26 (1+24+1) dot 22 Positions
Single Byte Characters 13 (0+12+1) dot 44 Positions
1
Two Byte Chinese Characters 30 (3+24+3) dot 19 Positions
Single Byte Characters 15 (1+12+2) dot 38 Positions
MSW3-4 Character
Types
Character Sizes
(Font + Right Space)
Font-A Printing Positions
(When Print Region is set to 72 mm)
0
ANK 12 (12+0) dot 48 Positions
1 ANK 15 (12+3) dot 38 Positions
<When set for Japanese language characters (When installed with other than Japanese language characters and set
to DBCS)>
MSW3-5 Character
Types
Character Sizes
(Left Space + Font + Right Space)
Chinese Character Printing Positions
(When Print Region is set to 72 mm)
0
Chinese
Character
26 (1+24+1) dot 22 Positions
1 Chinese
Character
30 (3+24+3) dot 19 Positions
MSW3-4 Character
Types
Character Sizes
(Font + Right Space)
Font-A Printing Positions
(When Print Region is set to 72 mm)
0
ANK 13 (12+1) dot 44 Positions
1 ANK 15 (12+3) dot 38 Positions