Star Micronics TUP500 series - 5. AMBIENT SPECIFICATIONS; 5.1. Temperature and Humidity

TUP500 Series Product Specifications
5-1
5. AMBIENT SPECIFICATIONS
5.1. Temperature and Humidity
5.1.1. When Operating
(1) Temperature 0 to 50ºC *However, printing is guaranteed at 5 to 50°C
(2) Humidity: 10 to 80% RH *However, there must be no condensation. Assumes 80% RH and 34°C.
Notes:
1. When using the optional power adapter, be aware that the operation guarantee range is determined by the operating
environment specications of the power adapter.
5.1.2. Storage Environment (Excluding Roll Paper)
(In the recommended packaging.)
(1) Temperature: -20 to 60°C
(2) Humidity: 10˚C to 90% RH (*No condensation)
Note:
1. The combination of 40°C and 90% RH (no condensation) is considered the worst values
regarding high temperatures and humidity.
0
10
20
30
40
50
60
70
80
R e la tive H u m idity (% )
A m bie nt Te m pera ture (°C)
0
10 5 20 30 40 50
Fig . 5.1 .1 G ua rante e d Tem p/H um idity R a nge s
G u aranteed Printing Range
and Guaranteed Operation Range
50°C 35% RH
40°C 58% RH
34°C 80% RH