Star Micronics TUP500 series - 2. CONFIGURATION; 2.1. Basic Configuration and Descriptions of Modules

TUP500 Series Product Specifications
2-1
2. CONFIGURATION
2.1. Basic Configuration and Descriptions of Modules
2.1.1. Basic Configuration
This unit is composed of modules. The configuration is shown below.
2.1.2. Thermal Mechanism Module
This is composed of the printer mechanism portion that prints using a thermal head while paper is being fed, and an
auto-cutter mechanism that cuts the paper according to a command. This is also provided a damper roller to alleviate
the shock caused by the inertia of the roll paper when feeding the thermal paper.
2.1.3. Presenter Module
The presenter module is composed of a mechanism that discharges and that recovers paper (such as receipts) that has
been printed and cut by the thermal mechanism module.
2.1.4. Control PCB Module
This is the control board that controls the thermal mechanism and the presenter.
2.1.5. Power Connector Cable Module
This is composed of the connector that connects the optional power adapter set to the control board, and the power
switch.
2.1.6. Roll Paper Supply Module
This supports the thermal roll paper on a shaft and functions to supply paper to the thermal mechanism module.
Thermal Mechanism Module (TMP542)
Presenter Module (PR500)
Control PCB Module (TBD500)
Power connector cable module (PBD-5)
Roll Paper Supply Module
Thermal Mechanism Module (TMP542)
Control PCB Module (TBD500)
Power connector cable module (PBD-5)
Roll Paper Supply Module
TUP592-24/TUP592-24J1 (Line thermal unit printer, presenter standard equipment)
TUP542-24/TUP542-24J1 (Line thermal unit printer, presenter not standard equipment)