Star Micronics TUP500 series - 15. OPERATING SPECIFICATIONS; 15.1. Operating Specifications

TUP500 Series Product Specifications
15-1
15. OPERATING SPECIFICATIONS
15.1. Operating Specifications
Power ON
Self-pring
Hex Dump
Presenter Sensor Adjustment Mode
Power ON (DIPSW 1-4 = OFF + DIPSW 1-5 = ON)
No Switch Input: PE/BM Sensor Adjustment Mode
NE Sensor Adjustment Mode
When ONLINE
Paper Conveyed While SW is Input
Printer Reset (Hold 2 Seconds)
Paper Discharge
Error Cancelled
Error
Printer Reset (Input 2 Seconds)
SW2SW1