Star Micronics TUP500 series - 5.2. EMC (Electromagnet Compatibility)

TUP500 Series Product Specifications 5-2
5.2. EMC (Electromagnet Compatibility)
5.2.1. Emission
Conforms to EN61000-6-3 The following shows the details.
Use the optional power adapter for the power supply.
(1) Field Emission Test/Power Line Continuity Test
Standards Cited Limit Value
EN55022 Class B
(2) Power High Frequency Current Test
Standards Cited Category
EN61000-3-2 Class A
Note: This product is rated at power of 75 W or less, so it is not targeted for the power harmonics cur-
rent test regulations.
(3) Flicker Test
Standards Cited Limit Value
EN61000-3-3
Pst Short Peak Flicker Value 1.0
Dc(%): Relative Constant State Voltage Change 3.3%
Dmax(%): Max. Relative Voltage Change 4.0%
D(t) (ms): Relative Voltage Change Characteristics 500 ms
5.2.2. Immunity
Conforms to EN55024. The following shows the details.
Use the optional power adapter for the power supply.
(1) Static Electricity Discharge Test
Standards Cited
Testing Levels
Touch In-air
EN61000-4-2
Level 2
(Voltage: 4KV)
Level 3
(Voltage: 8KV)
(2) Electromagnetic Field Radiated Immunity Test
Standards Cited Testing Levels
EN61000-4-3
Level 2
(Electromagnetic Field Strength: 3 V/m)
(3) Electrical Fast Transient Burst Test
Standards Cited
Testing Levels
Power Supply Port Control Port
EN61000-4-4
Level 2
(Voltage Peak: 1.0 KV)
Repeat Ratio: 5 KHz)
Level 2
(Voltage Peak: 0.5KV)
Repeat Ratio: 5 KHz)
(4) Lightening Surge Test
Standards Cited
Testing Levels
Line-to-Line Line-to-Earth
EN61000-4-5
Level 2
(Voltage: 1.0KV)
Level 3
(Voltage: 2.0KV)