TUP500 Series Product Specifications
14-13
14.7. MSW6
Bit Function OFF/“0” ON/“1” Emulation Note
SL SP EP
F
E Auto-loading Speed High speed Slow speed ○ ○ ○
D Auto-loading Error Retry Enabled Retry Disabled ○ ○ ○ *4
C Auto-loading Function Valid Invalid ○ ○ ○
B
A
9
8
7
6
5
4
ASB Presenter Paper Position Status
Invalid Valid ○ ○ ○ *2
3
2
1
0
*1) Presenter Operation Mode
n MSW6-3 MSW6-2 MSW6-1 MSW6-0 Presenter Operation Mode
“0” 0 0 0 0 Stored in device (loop effective) → Wait for discharge paper → Recovered in
device
“1” 0 0 0 1 Stored in device (loop effective) → Wait for discharge paper → Discharged
“2” 0 0 1 0 Stored in device invalid (loop invalid) → Wait for discharge paper →
Recovered in device
“3” 0 0 1 1 Stored in device invalid (loop invalid) → Wait for discharge paper →
Discharged
“4” 0 1 0 0 Stored in device invalid (loop invalid) → Discharged
“5” 0 1 0 1 (Reserved)
“6” 0 1 1 0 (Reserved)
“7” 0 1 1 1 (Reserved)
“8” 1 0 0 0 (Reserved)
“9” 1 0 0 1 (Reserved)
“A” 1 0 1 0 (Reserved)
“B” 1 0 1 1 (Reserved)
“C” 1 1 0 0 (Reserved)
“D” 1 1 0 1 (Reserved)
“E” 1 1 1 0 (Reserved)
“F” 1 1 1 1 (Reserved)
*2) ASB Presenter Paper Position Status
This function makes the presenter paper position status of the 9
th
byte of ASB valid/invalid.
When this function is invalid, the ASB 9
th
byte presenter paper position status becomes fixed at “0” and the status is
not changed.
When the presenter is not connected, the ASB 9
th
byte presenter paper position status becomes fixed at “0” and the
status is not changed.
*4) Auto-loading Error
Use this function to select to enable retry. Also, when a presenter is installed, auto-loading is possible if paper is
pulled out once, without a presenter paper jam error occurring, even if auto-loading fails.
A presenter paper jam error occurs when auto-loading fails when retry is disabled.
To Next Page
Loading...
