Staubli Cam Motion 1781 - STÄUBLI Standards; Screw Tightening Torques

2.4 - STÄUBLI STANDARDS .
2.4.1 - SCREW TIGHTENING TORQUES TZD10-CSV002.2
ATTENTION
The resistance of the screws and the efficiency of the tightening torques can only be
guaranteed by using the tightening torque values defined in the following tables or the
tightening torque values indicated in the specific chapters of this manual.
Tightening torques have a tolerance of ± 7%.
2.4.1.1 - Characteristic parts TZD10-CSV006.1
Description Torque in Nm H (mm) Ø
Oil drain valve 77 32 G3/4"
H
Ø
Drain plug 77 32 G3/4"
H
Ø
Outside cover retaining
screw
16,7 6 / 27 M16
Ø
H
Ø
H
2 - Description
10/62 © Stäubli 2013 – F.143.489.04-C 1781 B1 DRC10