Staubli Cam Motion 1781 - 5 - OPERATION

5 - OPERATION TMU35-CLU001.2
5.1 - OPERATING CONDITIONS TMU35-CLU002.1
Do not leave the cam motion uncovered while operating to prevent lint from entering. This could
damage the cam motion.
The temperature of the weaving room must be between 15°C and 35°C.
5.1.1 - INSTALLATION OF THE COVER TMU35-MTC001.4
Tools:
- Torque wrench.
Description Torque in Nm H (mm) Ø
Outside cover retaining screw 16,7 6 / 27 M16
Ø
H
Ø
H
2
4
5
1 (16,7 Nm)
3
IMGT4345
Removal:
- Unscrew the screws (1).
- Remove the cover (2).
- Remove the cover (3).
5 - Operation
1781 B1 DRC10 © Stäubli 2013 – F.143.489.04-C 15/62