2 - DESCRIPTION TMD10-DTC002.1
The assembly you have acquired consists of the following elements:
- A cam motion.
- A transmission.
2.1 - INTELLECTUAL PROPERTY TMD10-PPI001.1
STÄUBLI cam motion type machines and the optional products delivered with the machines are
protected by trademarks, patents and patent applications.
STÄUBLI is a registered trademark.
All copyright violations will be prosecuted.
2.2 - CHARACTERISTICS TMD10-CRT001.3
2.2.1 - CAM MOTION CHARACTERISTICS TMD10-CRT002.2
The cam motion can accommodate up to 10 levers on an 11-frame shaft.
The cams are available with ratios of 4, 5 or 6 picks, which enables the production of fabrics with
a repeat of 2, 3, 4, 5 or 6 picks.
The speed ratio of the cam motion's cam shaft in relation to that of the weaving machine may be
1 to 4, 1 to 5 or 1 to 6, depending on the gears used in the control housing.
The cams can be symmetrical (enabling a weft or a warp effect, according to how they are as-
sembled), or asymmetrical (one single warp or weft effect possible, per asymmetric cam).
The cam motion is equipped with a hydraulic leveling system, which allows:
- to bring the warp threads to their minimal tension, when the weaving machine is at a standstill,
by placing the levers at cross-shed position.
- to facilitate program changes by separating the rollers from the cams.
2.2.2 - COMPLIANCE WITH REGULATIONS TMD10-CRT004.1
This cam motions complies with the provisions in directive 2006/42/CE concerning quasi-machi-
nes.
2.3 - IDENTIFICATION TMD10-IDF001.1
For all inquiries, order for spare parts, or service request, please indicate the type and serial
number of the cam motion concerned, located on the nameplate.
STAUBLI FAVERGES SCA
74210 FAVERGES FRANCE
MADE IN FRANCE
Type:
Machine N°:
Date :
1 :
Indication of the cam motion type
2 : Serial number of the cam motion
3 : Specific information relative to the type of cam
motion
4 : Date (month - year)
2 - Description
1781 B1 DRC10 © Stäubli 2013 – F.143.489.04-C 9/62
To Next Page
Loading...