Staubli Cam Motion 1781 - 5.4 - FRAME HEIGHT ADJUSTMENT

5.4 - FRAME HEIGHT ADJUSTMENT TTI20-RGL011.1
5.4.1 - "DRC10" TTI20-RGL010.4
1 (M5 - 8 Nm)
IMGT3973
The height of the frame can be adjusted as required.
Procedure:
- Loosen screw (1).
- Adjust the position.
- Tighten the screw (1) to the recommended torque value.
5 - Operation
18/62 © Stäubli 2013 – F.143.489.04-C 1781 B1 DRC10