Staubli Cam Motion 1781 - 6.2.2 - VERIFICATION OF THE OIL LEVEL IN THE PUMP RESERVOIR

Procedure:
MAXI
MINI
RUNNING
IMGT3991
- Check the oil level and top up as required (See "Filling the cam motion", page 13).
ATTENTION
While running, the level should be located at the center of the sight glass, as indicated
on the label.
Note :
Oil may be topped up via the filter (1) without shutting down the cam motion.
6.2.2 - VERIFICATION OF THE OIL LEVEL IN THE PUMP RESERVOIR TMM50-NIH001.2
Tools / Servicing materials:
- oil (See "Table of equivalent oils and greases", page 41).
Frequency:
- Weekly.
6 - Maintenance
44/62 © Stäubli 2013 – F.143.489.04-C 1781 B1 DRC10