1 - FOREWORD TMA05-APP001.1
You have just acquired a new cam motion developed by STÄUBLI and we wish to thank you for
placing your confidence in our brand name.
This cam motion has been manufactured with utmost care and we are confident that it will provi-
de you complete satisfaction.
The purpose of this manual is to enable the technical weaving personnel to install, adjust and
maintain cam motions in optimal operating condition.
IMPERATIVE
Read this manual carefully.
Respect the instructions provided herein.
Communicate all the information included in the manual to the personnel concerned.
1.1 - WARRANTY TZA05-GAR001.1
The warranty conditions are stipulated in our general terms of sale. Refer to the sales conditions
which deal with elements not covered by the warranty.
ATTENTION
The use of parts other than genuine STÄUBLI parts is forbidden throughout the entire
service life of our products, as this might seriously damage these products or adversely
affect their service life.
Our guarantee is valid only if our products are:
- fitted with genuine STÄUBLI parts.
- operated and maintained in strict compliance with our specifications.
This manual is not a contractual document and
STÄUBLI reserves the right to modify it without
notice.
STÄUBLI cannot be held liable for omissions of technical or editorial nature or for accidental da-
mage or damage resulting from erroneous interpretation of the contents of this manual.
1.2 - PICTOGRAMS/TERMINOLOGY TMA05-TMG001.1
IMPERATIVE
An instruction which informs the reader of the possible risks of injury or death faced by the
user. This instruction is applicable in terms of industrial safety.
ATTENTION
An instruction which informs the reader of risks which may result in equipment damage.
This instruction is applicable to the quality of the work.
Lubrication with a grease gun
Lubrication applied with a brush
1 - Foreword
1781 B1 DRC10 © Stäubli 2013 – F.143.489.04-C 7/62
To Next Page
Loading...