Staubli Cam Motion 1781 - 5.4.2 - DISASSEMBLY;REASSEMBLY OF CENTRAL FRAME LINK

To Next Page

To Previous Page

5.4.2 - DISASSEMBLY/REASSEMBLY OF CENTRAL FRAME LINK TZU35-DPC001.2

5.4.2.1 - "DRC10" TZU35-DPC002.1

Disassembly:

IMGT4178

- Loosen screw (1).

- Remove the central frame attachment (2).

Note :

This procedure is valid for all central frame attachments.

- Remove the end frame attachments (3).

Note :

There is no need to loosen the adjusting screws of the end frame attachments (3).

- Remove the frame.

Reassembly:

- Position the frame.

- Lock the end frame attachments (3).

- Lock the position of the central frame attachment (2).

- Torque down the screw (1) (to a torque of 8 Nm).

Note :

This procedure is valid for all central frame attachments.

5.5 - IMMOBILISED LIFTING UNITS TMU35-RGL001.1

5.5.1 - CAM MOTION IMMOBILISED LIFTING UNITS TMU35-RGL002.3

Tools / Servicing materials:

- Not applicable

5 - Operation