Disassembly: Step 3
IMGT4440
6.2.10 - LUBRICATION OF THE HARNESS MOTION LEVER SHAFTS TMM50-GAL001.2
Tools / Servicing materials:
- Grease gun.
- Point (1): 20 cm³ of grease is recommended.
- Points (2), (3): 10 cm³ of grease is recommended.
(See "Table of equivalent oils and greases", page 41)
Frequency:
- With each item change without exceeding 4 months.
6 - Maintenance
56/62 © Stäubli 2013 – F.143.489.04-C 1781 B1 DRC10
To Next Page
Loading...