Staubli Cam Motion 1781 - 6.2.9.2 - Lubrication of the links of frame clamping loops with tool DRC10 (depending on installation); 6.2.9.3 - Lubrication of the lock of the frame brackets DRC10

Procedure:
1
2
IMGT3843
IMGT3844
- Grease the articulations "DRC10" using the lubrication tool and the grease gun.
6.2.9.3 - Lubrication of the lock of the frame brackets "DRC10" TRM50-LUB010.1
Prerequisites:
- Set the machine at cross shed position.
Tools / Servicing materials:
- Grease tool.
- Recommended grease (See "Table of equivalent oils and greases", page 41).
Frequency:
- With each item change without exceeding 4 months
6 - Maintenance
1781 B1 DRC10 © Stäubli 2013 – F.143.489.04-C 53/62