Steinbach Active Balls 50 - Timer Functionality Explained

How the timer works
The pumps has an integrated mer.
When the desired lter pump running me is set (visible on the LED bar), the pump
operates for the set me from the me of rst start-up and stops for the rest of the me
unl 24 hours have passed. The colors of the LED display do not have any specic
meaning.
Within a 24-hour period, you can only set one lter running me with the integrated
mer. To set several intervals within a 24-hour period, you need an external mer (see
example "External mer").
The mer has baery (see "Technical data"). If the power supply is disconnected or in
case of a power outage, the start me and the running me are saved.
When the power supply to the pump is restored, the mer reacvates the pump at the
set start me and for the set running me.
The ON/OFF buon only stops the pump while it is running. The mer
funcon can be deacvated only by disconnecng the pump from the power
supply.
Example: 6 hours running me
1. Connect the pump's power plug to the power supply.
The running me display is lit.
2. Press the mer buon
29
several mes, unl the LED "6" is lit.
3. Press the ON/OFF buon
30
to switch on the pump
10
.
The pump now runs for 6 hours nonstop. If you pressed the ON/OFF buon at 12 PM,
for instance, the lter system runs unl 6 PM.
The mer acvates the pump again at 12 PM.
Example: external mer
To use this mode a baer y must be inserted and you need an external mer (not
included in the package contents).
4. Connect the mer to the power supply and set the desired running mes.
The mer must not supply power to the pump.
5. Connect the pump's power plug to the mer.
The running me display is lit. If the display is not lit, the mer is inacve. Read the
operang instrucons of the mer.
6. Press the mer buon
29
several mes, unl the LED "24" is lit.
The 24-hour seng indicates connuous operaon.
7. Press the ON/OFF buon
30
to switch on the pump
10
.
43