Steinbach Active Balls 50 - Winter Storage Instructions; Cleaning Procedures; Cleaning Filter Balls

Winter storage
Always store the dried lter medium separately from the lter vessel in the
winter.
1. Press the ON/OFF buon
30
to switch o the pump
10
.
2. Pull the power plug of the pump
10
.
3. Close the shut-o valves or block the water ow to the pool's connecng hoses.
4. Uninstall the connecng lines to the pool and drain the hoses.
5. Loosen the drain screw
24
on the pump housing and completely empty the pump.
6. Remove the lter medium (see the "Exchanging the lter medium" secon).
If you are using lter balls, wash them by hand and let them dry completely.
7. Rinse the lter system with tap water.
8. Let the lter system dry completely.
The device can be stored over the winter.
Cleaning
NOTICE!
Improper cleaning might damage the device.
- Clean the surface of the device with plain water aer each use.
-
Do not use any aggressive cleaning agents.
- Do not use any sharp or metal objects such as knives, hard
scrapers or similar.
- Do not use any cleaning brushes.
- Do not use a high-pressure cleaner.
Cleaning the filter balls
Never clean the lter balls in the washing machine or tumble dryer!
Clean the lter balls in the sink under running water or use a garden hose.
If the cleaned lter balls no longer clean the pool water suciently, exchange the lter
balls.
52