EasyManua.ls Logo

Steris gi4000 - Technical Specifications; General Specifications

Steris gi4000
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
00732467 Rev. D Page 35 of 110
8.0 Technical Specifications
8.1 General
Internal Design: Solid State
Output Configuration: Isolated (RF Floating)
Cooling: Natural Convection, Rear Panel Vent
Mounting: GoCart Mobile Cart or a flat, stable surface which
can withstand the weight of the gi4000 ESU.
Reference section 8.3 Dimensions and Weight.
Service Life: 7 Years
Equipotential Ground Connection: An equipotential ground connection is provided to
allow connection of the gi4000 ESU to a common
ground by way of a potential equalization connector.
This connection meets IEC 60601-1 requirements.
8.2 Classifications
Type of Protection Against
Electrical Shock: Class I (IEC 60601-1)
Degree of Protection Against
Electrical Shock: Type CF Equipment (IEC 60601-1)
Defibrillation Proof Applied Parts
Applied parts are the electrosurgical accessories
connected to the output receptacles of the unit,
including but not limited to: dispersive electrodes,
ArConnect® argon probe connector, ArC Smart™
argon coagulation probe(s), APC probes, monopolar
active cords, hot snares, hot forceps,
sphincterotomes, TouchSoft Coagulator® Monopolar
Probe, bipolar probes, irrigation tubing, etc.
Degree of Ingress Protection
(IP Rating): IPX0 (gi4000 ESU)
IP68 (gi4000 ESU footswitch)
Sterilization: The gi4000 ESU and accessories are NOT intended
to be sterilized or autoclaved.

Table of Contents