Stihl MS 341 - Felling Notches and Specific Cuts; Felling Notch Creation; Sapwood Cuts Application

Online version - not for reprint
58 MS 341, MS 361, MS 361 C
Check “
#“/“$“ function
on Master Control lever
or
separate stop switch
no
Install new
ignition module
yes
no
Look for fault in fuel system
or carburetor,
check engine for leaks,
check position of flywheel on
crankshaft
yes
Check operation of
Master Control lever
or separate stop switch
– Short circuit wire chafed?
– Contact gap (contact springs)
If necessary, install new ignition lead
and/or contact springs
Re-connect short circuit wire
2
3
Powerful
spark?
Engine
runs