STONEX R2W PLUS 500 - Page 65

R2W PLUS
56
④Collimate prism in target
point P1 where instrument
will be transferred.
Meantime click “Measure”
key.
【Measure】
⑤Click “Continue” key and
coordinate of Point P1
displays in the lower left
corner of screen.
【Continue】
⑥Click “Save” key.
Coordinate of P1 can be
ascertained and it will return
to main menu.At last power
off and transfer instrument
to P1(transfer prism from P1
to P0 meantime).
【Save】