16
03.11
Strapex SMA 30
1 TECHNICAL DATA
TABLE OF CONTENTS
Weight 220 kg (485 lbs)
Minimum dimension Width 100 mm (4“)
of package Height 30 mm (1.2“)
Table height 800 mm (31.5”)
Tensioning force 50–450 N continuously
adjustable
Arch dimension (W x H) 650 x 600 mm (26” x 24”)
850 x 600 mm (33” x 24”)
850 x 800 mm (33” x 31”)
1050 x 800 mm (41” x 31”)
1250 x 800 mm (49” x 31”)
Strappings per minute approx. 24 strappings
Emission sound
pressure level < 80 dB (A)
Sealing High effi ciency heat seal
Voltage Single phase AC
230 V / 50 Hz, 115 V / 60 Hz
Power consumption 0.72 kW
PLASTIC STRAP
Strap quality Polypropylene (PP)
Strap width 12 mm (
1
/
2
“)
Strap thickness from 0.60 mm (.021”)
Strap coil inside-Ø 200, 230, 280 mm
(7.8”, 9”, 11”)
1. Technical data 16
2. General information 17
3. Modes of operation 17
4. Safety instructions 18
5. Description 19
5.1 Design 19
5.2 Functional description 19
5.3 Operating elements 20
6. Transportation and initial operation 21
6.1 Install machine after transportation 21
6.2 Changing strap coil 21
7. Operating instructions 22
7.1 Adjust strap tension 22
7.2 Selector switch Manual / Automatic 22
7.3 Start strapping 22
7.4 Check of seal 23
8. Preventive maintenance 24
8.1 Preventive maintenance schedule 24
9. Corrective maintenance / Adjustments 25
9.1 Adjust welding temperature 25
9.2 Set strap magazine fi lling 25
9.3 Replacing fuses 25
9.4 Set distance between transport and
pressure roller 26
9.5 Adjust limit switches (control cams) 26
9.6 Setting parameters 27
9.7 Elimination of faults 27
10. Dismantling and disposal 28
11. Electric diagrams 42
12. Parts list 46
Fig. 1
1100
340
600
55
B
H
1520
100
800
700
To Next Page
Loading...
