strapex SMA 20 User Manual

02.11
Halbautomatische Maschine zum Umreifen mit Kunststoffband
Semi-automatic machine for plastic strapping
Machine semi-automatique pour le cerclage par bande plastique
Ab Serie-Nr. 41‘986
From serie no 41‘986
A partir du no de série 41‘986
SMA 20
Art. Nr. 351.400.001
DEUTSCH 3
ENGLISH 19
FRANÇAIS 35
Vor dem Gebrauch der
Maschine die Betriebs-
anleitung aufmerksam
lesen.
Before using the machi-
ne, read the operating
instructions carefully.
Avant l’utilisation de
la machine, consultez
soigneusement le
mode d’emploi.
BETRIEBSANLEITUNG Originalbetriebsanleitung
OPERATING INSTRUCTIONS Translation of original manual
MODE D‘EMPLOI Traduction du mode d’emploi original

strapex SMA 20 Specifications

General

Model	SMA 20
Category	Packaging equipment
Strap Type	PP/PET
Bundles per Hour	Up to 30
Type	Strapping machine
Strapping Thickness	0.5-1.0mm
Sealing Method	Friction weld sealing

Summary

Safety Instructions

Machine Description

Design and Assemblies

Outlines the main assemblies of the machine, including frame and units.

Functional Description

Operation

Adjusting Strap Tension

Instructions for adjusting the strap tension using the control panel.

Adjusting Strap Feeding

Details how to set the strap feeding length via manual or permanent input.

Starting the Strapping Cycle

Steps to initiate the strapping cycle after preparation.

Basic Strap Tension Setting

Checking the Strap Seal

Preventive Maintenance

Corrective Maintenance

Adjusting Welding Temperature

Procedure to adjust the welding temperature based on strap type.

Adjusting Heating Element Height

Adjusting Tension Belt and Strap Channel Gap

Adjusting Zero-Position

Troubleshooting Common Faults

Guide for diagnosing and resolving common machine faults.

Electric Diagram

Component Explanation

Functional Diagram

Parts List