23
03.11
Strapex SMA 30
7.4 INSPECTION OF SEAL
– Check the seal (see Fig. 9) for its appearance at
regular intervals.
An incorrectly welded strapping cannot
secure the package and can thus lead to
injuries.
Never transport or move packaged
goods with incorrectly welded seals.
– If the seal is not performed satisfactorily, the
welding temperature (see chapter 9.1) must be
adjusted.
Fig. 9
1 Good seal (the complete surface is cleanly welded
without excess material being forced out sideways)
2 Poorly welded seal, welding temperature too low
(welding not made over entire welding surface)
3 Poorly welded seal, welding temperature too high
(excess material is forced out sideways)
2 3
1
To Next Page
Loading...
