Tray Maintenance Replacing Tray Sheets
Page 60
© Copyright 2022 Stratasys. All rights reserved.
7. Use acetone to remove resin from the tray threads. Remove any remaining residue from
the tray threads with compressed air or paper towels.
Figure 9: Clean tray components
8. Remove any remaining resin from gaskets using paper towels and IPA. If needed, sonicate
the gaskets in an IPA bath.
Sonicate gaskets in an IPA bath for no more than 30 seconds per cleaning.
Do not use acetone to clean the tray bottom. Damage to the O-rings will result.
To Next Page
Loading...
