10 BA_KA-ED_A22_190313_en.doc
3 Installation and commissioning
The S0 main switch is located on the distribution box below the tabletop (Fig. 1). The
stop button S5 is located in the control box over the tabletop (Fig. 10).
CAUTION! Danger of injury!
The machine's carriage run extends beyond the outer edge of the
machine during operation. Make sure that this area is not accessible,
because otherwise there is a risk of injury.
The machine may not be operated without protective panels (belt
protection) for the upper part and for the motor (beneath the table
top). Otherwise there is a risk of fingers being caught, bodily injuries
and clothing being drawn in.
ATTENTION!
Don´t use as a handle!
Proceed as follows for installation: unpack and clean machine.
To Next Page
Loading...
