Strobel KA-ED - Page 6

2 BA_KA-ED_A22_190313_en.doc
4.13 Function sequence .......................................................................................................... 28
4.13.1 Main switch S0 on ............................................................................................. 28
4.13.2 Close clamping device, lapel part is inserted ................................................... 28
4.13.3 Start of the automatic sewing process ............................................................. 28
4.13.4 Retraction of the carriage (only once after the start) ...................................... 28
4.13.5 Sewing a blind stitch ......................................................................................... 29
4.13.6 Retraction of the carriage ................................................................................. 29
4.13.7 End of the sewing program (S10 “light” and S8 “light”) .................................. 29
4.14 +Machine maintenance (Fig. 16a) .................................................................................. 30
5 Notes on repair and adjustment .............................................................................................. 31
5.1 The edge distance at stitch start and at the stitch end (Fig. 16) .................................... 31
5.2 Setting the light barriers (Fig. 16a + Fig. 17) ................................................................... 33
5.3 Setting the plunger lifting (Fig. 18) ................................................................................. 35
5.4 Setting the helipot (Fig. 20) ............................................................................................ 37
5.5 Setting of basic switch S3 (Fig. 21) .................................................................................. 38
5.6 Setting of end switch S2 (Fig. 22) .................................................................................... 39
5.7 Setting of switch S7 (Fig. 23) ........................................................................................... 40
5.8 Setting the clamping device and the cover panel .......................................................... 41
5.8.1 Setting the clamping device (Fig. 24) ................................................................ 41
5.8.2 Setting the cover plate (for the light barrier) (Fig. 28) ..................................... 43
5.9 Differential feed, rear ..................................................................................................... 44
5.9.1 Setting the Differential feed, rear (Fig. 26) ...................................................... 44
5.9.2 Rear differential transport drive (Fig. 27) ......................................................... 46
5.9.3 Surface pressure start-up reel (Fig. 28) ............................................................ 47
5.10 Setting the stitch distance and length ............................................................................ 48
5.10.1 Setting the side transport (Fig. 29) ................................................................... 48
5.10.2 Setting the stitch distance (Fig. 13) .................................................................. 48
5.11 Setting the needle stroke (Fig. 30a + b) .......................................................................... 49
5.12 Loop stroke (Fig. 31)........................................................................................................ 49
5.12.1 Setting the loop stroke (Fig. 32) ....................................................................... 50
6 LASER (optional features) (Fig. 34) ........................................................................................... 51
6.1 General ............................................................................................................................ 51
6.1.1 Setting of the lasers: "Stitch start" (1) .............................................................. 51
6.1.2 Setting of the lasers: "First stitch" (2)............................................................... 51
7 Problems during sewing and possible solutions ...................................................................... 53