EN-23
DRAFT
Reading the LCD
In shaver mode, the LCD will show:
VAR
F
9000
MC DISP NAME
1 2
3 5
4
1. Footswitch
status
Crossre Footswitch connected
iSWITCH footswitch connected
not connected
2. Footswitch
response
1
TOUCH
one touch
(pressing the foot pedal once will activate the
shaver to a default speed; pressing again will stop
it)
FIXED
xed
(pressing the foot pedal at any pressure will result
in a constant speed)
VAR
variable
(shaver speed will vary, depending on the pressure
applied to the foot pedal)
mix
(oscillate speed is xed; forward/reverse speed is
variable)
3. Direction
F
forward
R
reverse
oscillate
4. Cutter
name
(name)
5. Speed (#) rotations per minute
To Next Page
Loading...
Need help?
General
