Stryker Crossfire 2 - Page 30

EN-28
DRAFT
Reading the LCD
In RF ablation mode, the LCD will show:
1
2
3
5
4
11
SERFAS
HC
. . .
6
7
1. Footswitch status
Crossre Footswitch connected
iSwitch footswitch connected
not connected
2. Mode
cut mode activated
coagulation mode activated
3. Force modulation
force modulation activated
force modulation not activated
4. COAG power
low
medium
high
5. Hand controls
hand control is enabled
hand control is disabled
6. CUT power (#) power setting
7. Disposable RF
probe name
(name)