33..33.. TToo TTeesstt tthhee RRoovveerr
33..33..11.. TToo CCoonnnneecctt PPoowweerr
NNoottee -- Before first use, initial docking is required. Initial docking will add prefill fluid to the canister. See
To Dock the
Rover
(page 54). Failure to comply will result in prefill errors and prevent the rover from operating properly. See
Glossary
(page 74) for definition of prefill fluid.
1. Connect the rover to facility electrical power using the supplied power cord. Insert the plug of the power cord through the
strain relief hole before connecting the power cord to the rover (Figure 16). The power cord plug has a latched release
button to prevent unintended removal from the rover power receptacle.
FFiigguurree 1166 –– TToo CCoonnnneecctt PPoowweerr
2. Push the power switch to the ON position.
3. To ensure safe use of the rover, read the safety warnings on the screen. Touch the CONFIRM button to acknowledge
understanding.
EN 32 700000969828 Rev-AA
To Next Page
Loading...
Need help?
General
