55..44.. TToo DDoocckk tthhee RRoovveerr
WWAARRNNIINNGG -- PPIINNCCHH PPOOIINNTT HHAAZZAARRDD —— Always keep hands out and away from the mating surfaces of the rover and
docker during the docking procedure.
NNoottee -- If the rover is full or the rover will not be used for two hours, dock the rover to dispose of the collected fluid waste
in the canister.
NNoottee -- Use the docker to empty the rover canister of fluid waste and perform a wash cycle. Prefill fluid will remain inside
the canister after the wash cycle is complete. Prefill contains a specified amount of detergent for initiating the breakdown of
fluid waste collected during rover use. After completing the wash cycle, the rover is ready for use or storage.
NNoottee -- Before docking the rover, always allow the docker to initiate for at least 60 seconds after applying power to the
docker.
NNoottee -- The docker provides power to the rover during the docking process.
NNoottee -- For optimal cleaning of the rover canister, use a water temperature of 37.8 to 43.3 °C [100 to 110 °F].
NNoottee -- Do not lock the rover casters while the rover is connected to the docker.
EN 54 700000969828 Rev-AA
To Next Page
Loading...
Need help?
General
