35
S
9. ConnectSuite
Note Refer to Stryker ConnectSuite Pre-Install document, for specic requirements.
ConnectSuite is Stryker’s new IP video teleconferencing platform that replaces the previous generation
Video Hub 2 (VH2). ConnectSuite is compatible with only SPI3 routers at this time. Its advantages
are that rather than running over baseband cable like the VH2, it enables OR-integrated calls over the
customer’s existing network and it also has the optional SuiteView component, which allows customer
computers to view into room endpoints concurrent with room to room calls.
SuiteLink is always required in every installation; it is like the new “hub,” which coordinates calls and
keeps track of room status. SuiteStream is the codec that must be installed into every room that wants
to stream calls. SuiteView is completely optional soware that is installed on the SuiteLink server
AND on customer computers to enable the desktop view function. e Osite Package is an optional
component needed if the customer wants to make calls to other facilities with 3rd party codecs such as
Polycom Codecs or Polycom H.323 room-conferencing systems.
e ConnectSuite Pre-Install document is required to be lled out and returned prior to scheduling
installation. e product has strict customer network requirements. All requirements are NOT listed
in this document.
9.1 SuiteStream
Note
SuiteStream cannot be installed on an SPI3 endpoint in parallel with a local HD
codec (Polycom).
Dimensions 12.7”W x 2.6”H x 17.3”D
Data Two (2) Ethernet drops at each SuiteStream location.
Two SuiteStreams in one OR would require 4 Ethernet drops.
9.2 SuiteLink/SuiteView
Note Server is racked in a customer provided-rack, any location with network access is
acceptable.
Dimensions 17.32”W x 1.75”(1U)H x 22”D
Data One (1) drop at its location.
9.3 Osite Package
Note Osite Package is racked in a customer-provided rack adjacent to the SuiteLink
server.
Dimensions 13”W x 5.6”(4U)H x 17.3”D
Data ree (3) drops each at SuiteLink server location. Internet connectivity on
one drop is required.
Two osite packages would require six (6) Ethernet drops.