Stryker ProCuity Series User Manual

enabled Stryker beds that are verified and validated with the ii BBeedd WWiirreelleessss software and is not intended to provide bed
status information for non-Stryker beds. Patient health information is not communicated or stored.
This product is not intended for:
• Behavioral health patient use
• Pediatric patient use
• Oxygen rich environments
• Sterile environments
• Home care or long-term care facility settings
CClliinniiccaall bbeenneeffiittss
Patient treatment, patient positioning, and diagnostic
EExxppeecctteedd sseerrvviiccee lliiffee
The PPrrooCCuuiittyy bed series has a 10 year expected service life under normal use conditions and with appropriate periodic
maintenance.
The backup batteries have a one year expected service life under normal use conditions.
DDiissppoossaall//rreeccyyccllee
Always follow the current local recommendations and/or regulations governing environmental protection and the risks
associated with recycling or disposing of the equipment at the end of its useful life.
CCoonnttrraaiinnddiiccaattiioonnss
None known.
SSppeecciiffiiccaattiioonnss
WWAARRNNIINNGG -- Always use Stryker approved support surfaces that have been tested for compatibility with the product frame
to avoid the risk of patient entrapment.
Safe working load
NNoottee:: Safe working load indicates the sum of the
occupant, accessories, and mattress weight.
550 lb
249.5 kg
Maximum patient weight
500 lb
226.8 kg
Mass of equipment with safe
working load
Standard
1000 lb
453.6 kg
ZZoooomm (ZM option)
1100 lb
499 kg
Product weight
Standard
450 lb
204.1 kg
ZZoooomm (ZM option)
550 lb
249.5 kg
Scale system capacity maximum 551.2 lb 250 kg
3009-009-001 Rev B.0 7 EN

Stryker ProCuity Series Specifications

General

Bed Type	Hospital Bed
Weight Capacity	500 lbs (227 kg)
Integrated Scale	Yes
Bed Exit System	Yes
Side Rail Controls	Yes
Category	Medical Equipment
Monitoring Parameters	Weight, bed exit
Display	Touchscreen
Alarms	Bed Exit, Low Battery