Stryker ProCuity Series - Weighing a patient; Adding or removing equipment

WWeeiigghhiinngg aa ppaattiieenntt
WWAARRNNIINNGG -- Do not use the scale system reading as a reference for medical treatment. The scale system assists only to
monitor the patient’s weight variation.
Before you place a patient on the product, zero/tare the scale (
Zeroing/taring the scale (page 32)).
NNoottee -- Always zero/tare the scale after you add a support surface, mattress, or linens to the product.
To weigh a patient:
1. Press the SSccaallee button (D) on the footboard control panel (
Footboard control panel - Home (page 29)).
2. On the SSccaallee screen, press the SSaavvee WWeeiigghhtt button (C) (
Footboard control panel - Scale (page 31)).
NNoottee -- Do not touch the product when you weigh the patient.
The SSccaallee IInnffoo screen will display when the last weight was taken on the LLaasstt WWeeiigghh line (
Footboard control panel - Scale
(page 31)).
NNoottee -- The previous weight from the LLaasstt WWeeiigghh line will appear in SSccaallee HHiissttoorryy (F) (
Footboard control panel - Scale
(page 31))
AAddddiinngg oorr rreemmoovviinngg eeqquuiippmmeenntt
NNoottee -- The add or remove equipment function is only available when there is 4.4 lb (2 kg) gain/loss.
A
D
C
B
E
A Home
Returns to the HHoommee screen (
Footboard control panel
- Home
(page 29))
B Info
Displays the SSccaallee IInnffoo screen (
Footboard control
panel - Scale
(page 31))
C Return
Returns to the SSccaallee screen (
Footboard control panel
- Scale
(page 31))
D Reset
Select to reset the added equipment to zero
E Save
Select to save the current displayed weight as
equipment
To add or remove equipment:
1. Press the SSccaallee button (D) on the footboard control panel (
Footboard control panel - Home (page 29)).
3009-009-001 Rev B.0 33 EN