Stryker ProCuity Series User Manual

3. Press the BBeedd EExxiitt button (B) on the footboard control panel to arm bed exit ( Footboard control panel - Home (page
29)).
4. Select the desired zone (B, C, D) (
Footboard control panel - Bed exit (page 34)).
If you change the parameter conditions for bed exit:
• Bed exit priority signal sent (
Setting up wired nurse call communication (page 14))
• LEDs on the footboard and siderails flash red
• Sound alarm is triggered
To disarm bed exit, press TTuurrnn OOffff (E) (
Footboard control panel - Bed exit (page 34)).
FFoooottbbooaarrdd ccoonnttrrooll ppaanneell -- ii BBeedd WWaattcchh
The ii BBeedd WWaattcchh screen displays the ii BBeedd WWaattcchh functions of the product.
When enabled,
ii BBeedd WWaattcchh alerts when changes are made to the selected bed settings:
• Low height
• Siderails up
• Head angle
• Bed flat
A
J
C
D
F
B
I
H
E
G
K
A Home
Returns to the HHoommee screen (
Footboard control
panel - Home
(page 29))
B
Info
Displays the
ii BBeedd WWaattcchh IInnffoo screen
C
Low Height Monitors low height of the bed
D
Head right siderail Monitors head right siderail in the highest position
E Head left siderail
Monitors head left siderail in the highest position
F
Foot right siderail Monitors foot right siderail in the highest position
G Foot left siderail
Monitors foot left siderail in the highest position
H
Head Angle Monitors head angle of the bed
I Bed Flat
Monitors bed flat position
J Turn Off Turns off
ii BBeedd WWaattcchh
K Exit Returns to the
ii BBeedd WWaattcchh OOnn screen
3009-009-001 Rev B.0 35 EN

Stryker ProCuity Series Specifications

General

Bed Type	Hospital Bed
Weight Capacity	500 lbs (227 kg)
Integrated Scale	Yes
Bed Exit System	Yes
Side Rail Controls	Yes
Category	Medical Equipment
Monitoring Parameters	Weight, bed exit
Display	Touchscreen
Alarms	Bed Exit, Low Battery